Water hardness by state
How hard is the water in Missouri?
Tap water in Missouri averages 23.5 grains per gallon (401 ppm calcium carbonate). That number determines how fast limescale coats your water heater, shower glass and appliances.
Com base em 285 medições de 85 pontos de monitoramento, 2018-03 → 2023-08.
Dureza da água por condado — Missouri
Medianas das medições registradas em cada área. A dureza varia muito mais dentro de um estado do que entre estados vizinhos — é daí que vem o seu valor real.
| Condado | gpg | mg/L | Intervalo (mg/L) | Classificação |
|---|---|---|---|---|
| Jackson County | 25.8 | 442 | 266–646 | Very hard water |
| Boone County | 23 | 394 | 262–570 | Very hard water |
| Clay County | 30.8 | 526 | 276–565 | Very hard water |
| Pulaski County | 10.4 | 177 | 126–214 | Moderately hard water |
| Oregon County | 10.2 | 175 | 118–189 | Moderately hard water |
| Carter County | 10.6 | 181 | 125–190 | Moderately hard water |
| Barry County | 9.9 | 170 | 150–180 | Moderately hard water |
O intervalo corresponde aos percentis 10-90 das medições locais. Áreas com menos de cinco medições são omitidas em vez de estimadas.
What 23.5 gpg means in Missouri
This is very hard water — among the harshest levels measured. Scale attacks water heaters, dishwashers and pipes fast, shortening appliance lifespan and inflating energy bills. Protection is essential.
What it does to your home
Water heater: even a thin layer of scale insulates the heating element and drives energy use up.
Appliances: dishwashers, washing machines and coffee makers scale up and fail years early.
Fixtures and skin: white spots on faucets and glass, dry skin and dull hair after every shower.
Como este valor foi obtido
Median of the site-level medians at 85 groundwater monitoring sites (wells and springs — the sources most US public systems draw from) in the USGS National Water Information System (285 individual measurements, 2018-03 → 2023-08). Each site is collapsed to one value first so that a heavily sampled location cannot skew the state figure; the range shown is the 10th-90th percentile across sites. This describes the raw water resource, not a specific municipal tap after treatment.
Water Quality Portal — USGS National Water Information System (NWIS), characteristic "Hardness, Ca, Mg"Statewide average — hardness varies by utility and season. Always verify with your local water quality report.
Frequently asked questions — Missouri
Is 23.5 gpg considered hard water?
On the US scale, 0–3.5 gpg is soft, 3.5–7 gpg moderately hard, 7–10.5 gpg hard and above 10.5 gpg very hard. At 23.5 gpg (401 ppm), water in Missouri is classified as Very hard water.
Does Missouri have a limescale problem?
Water in Missouri averages 23.5 gpg — Very hard water. The harder the water, the faster calcium carbonate deposits build up in water heaters, appliances and pipes. Below 3.5 gpg the risk is minimal; above 7 gpg scale becomes a running cost.
How do I find the exact water hardness at my address in Missouri?
Check your utility's annual water quality report (Consumer Confidence Report) or your water bill, or use our free interactive hardness map. Hardness can vary widely between neighboring utilities in Missouri.
Do I need a salt-based water softener at 23.5 gpg?
Not necessarily. Salt softeners add sodium to your water and need constant refills. LIMPEO treats limescale with an electromagnetic field — no salt, no chemicals, no maintenance — and keeps healthy minerals in your drinking water.