Water hardness by state

How hard is the water in Missouri?

Tap water in Missouri averages 23.5 grains per gallon (401 ppm calcium carbonate). That number determines how fast limescale coats your water heater, shower glass and appliances.

Sur la base de 285 mesures issues de 85 points de surveillance, 2018-03 → 2023-08.

Dureté de l’eau par comté — Missouri

Médianes des mesures relevées dans chaque comté. La dureté varie beaucoup plus à l’intérieur d’un État qu’entre États voisins : c’est de là que vient réellement votre valeur.

Comtégpgmg/LFourchette (mg/L)Classification
Jackson County25.8442266646Very hard water
Boone County23394262570Very hard water
Clay County30.8526276565Very hard water
Pulaski County10.4177126214Moderately hard water
Oregon County10.2175118189Moderately hard water
Carter County10.6181125190Moderately hard water
Barry County9.9170150180Moderately hard water

La fourchette correspond aux 10e-90e centiles des mesures locales. Les comtés comptant moins de cinq mesures sont omis plutôt qu’estimés.

What 23.5 gpg means in Missouri

This is very hard water — among the harshest levels measured. Scale attacks water heaters, dishwashers and pipes fast, shortening appliance lifespan and inflating energy bills. Protection is essential.

What it does to your home

Water heater: even a thin layer of scale insulates the heating element and drives energy use up.

Appliances: dishwashers, washing machines and coffee makers scale up and fail years early.

Fixtures and skin: white spots on faucets and glass, dry skin and dull hair after every shower.

Comment cette valeur a été obtenue

Median of the site-level medians at 85 groundwater monitoring sites (wells and springs — the sources most US public systems draw from) in the USGS National Water Information System (285 individual measurements, 2018-03 → 2023-08). Each site is collapsed to one value first so that a heavily sampled location cannot skew the state figure; the range shown is the 10th-90th percentile across sites. This describes the raw water resource, not a specific municipal tap after treatment.

Water Quality Portal — USGS National Water Information System (NWIS), characteristic "Hardness, Ca, Mg"

Statewide average — hardness varies by utility and season. Always verify with your local water quality report.

Frequently asked questions — Missouri

Is 23.5 gpg considered hard water?

On the US scale, 0–3.5 gpg is soft, 3.5–7 gpg moderately hard, 7–10.5 gpg hard and above 10.5 gpg very hard. At 23.5 gpg (401 ppm), water in Missouri is classified as Very hard water.

Does Missouri have a limescale problem?

Water in Missouri averages 23.5 gpg — Very hard water. The harder the water, the faster calcium carbonate deposits build up in water heaters, appliances and pipes. Below 3.5 gpg the risk is minimal; above 7 gpg scale becomes a running cost.

How do I find the exact water hardness at my address in Missouri?

Check your utility's annual water quality report (Consumer Confidence Report) or your water bill, or use our free interactive hardness map. Hardness can vary widely between neighboring utilities in Missouri.

Do I need a salt-based water softener at 23.5 gpg?

Not necessarily. Salt softeners add sodium to your water and need constant refills. LIMPEO treats limescale with an electromagnetic field — no salt, no chemicals, no maintenance — and keeps healthy minerals in your drinking water.