Water hardness by state
How hard is the water in Idaho?
Tap water in Idaho averages 10.8 grains per gallon (184 ppm calcium carbonate). That number determines how fast limescale coats your water heater, shower glass and appliances.
Com base em 223 medições de 88 pontos de monitoramento, 2018-03 → 2023-12.
Dureza da água por condado — Idaho
Medianas das medições registradas em cada área. A dureza varia muito mais dentro de um estado do que entre estados vizinhos — é daí que vem o seu valor real.
| Condado | gpg | mg/L | Intervalo (mg/L) | Classificação |
|---|---|---|---|---|
| Butte County | 14.3 | 245 | 150–301 | Moderately hard water |
| Gem County | 5.6 | 95 | 20–171 | Soft water |
| Owyhee County | 16.3 | 279 | 47–648 | Hard water |
| Gooding County | 10.6 | 182 | 167–224 | Moderately hard water |
| Jerome County | 16.5 | 283 | 262–314 | Hard water |
| Bingham County | 8.4 | 144 | 139–145 | Soft water |
O intervalo corresponde aos percentis 10-90 das medições locais. Áreas com menos de cinco medições são omitidas em vez de estimadas.
What 10.8 gpg means in Idaho
At this level limescale builds up slowly but steadily. White traces appear on faucets and shower glass within months, and the water heater loses a little efficiency every year. Light protection already pays off.
What it does to your home
Water heater: even a thin layer of scale insulates the heating element and drives energy use up.
Appliances: dishwashers, washing machines and coffee makers scale up and fail years early.
Fixtures and skin: white spots on faucets and glass, dry skin and dull hair after every shower.
Como este valor foi obtido
Median of the site-level medians at 88 groundwater monitoring sites (wells and springs — the sources most US public systems draw from) in the USGS National Water Information System (223 individual measurements, 2018-03 → 2023-12). Each site is collapsed to one value first so that a heavily sampled location cannot skew the state figure; the range shown is the 10th-90th percentile across sites. This describes the raw water resource, not a specific municipal tap after treatment.
Water Quality Portal — USGS National Water Information System (NWIS), characteristic "Hardness, Ca, Mg"Statewide average — hardness varies by utility and season. Always verify with your local water quality report.
Frequently asked questions — Idaho
Is 10.8 gpg considered hard water?
On the US scale, 0–3.5 gpg is soft, 3.5–7 gpg moderately hard, 7–10.5 gpg hard and above 10.5 gpg very hard. At 10.8 gpg (184 ppm), water in Idaho is classified as Moderately hard water.
Does Idaho have a limescale problem?
Water in Idaho averages 10.8 gpg — Moderately hard water. The harder the water, the faster calcium carbonate deposits build up in water heaters, appliances and pipes. Below 3.5 gpg the risk is minimal; above 7 gpg scale becomes a running cost.
How do I find the exact water hardness at my address in Idaho?
Check your utility's annual water quality report (Consumer Confidence Report) or your water bill, or use our free interactive hardness map. Hardness can vary widely between neighboring utilities in Idaho.
Do I need a salt-based water softener at 10.8 gpg?
Not necessarily. Salt softeners add sodium to your water and need constant refills. LIMPEO treats limescale with an electromagnetic field — no salt, no chemicals, no maintenance — and keeps healthy minerals in your drinking water.