Water hardness by state
How hard is the water in Indiana?
Tap water in Indiana averages 17.7 grains per gallon (302 ppm calcium carbonate). That number determines how fast limescale coats your water heater, shower glass and appliances.
Sur la base de 106 mesures issues de 62 points de surveillance, 2018-04 → 2023-08.
Dureté de l’eau par comté — Indiana
Médianes des mesures relevées dans chaque comté. La dureté varie beaucoup plus à l’intérieur d’un État qu’entre États voisins : c’est de là que vient réellement votre valeur.
| Comté | gpg | mg/L | Fourchette (mg/L) | Classification |
|---|---|---|---|---|
| LaPorte County | 15.7 | 269 | 217–296 | Hard water |
| Hendricks County | 18.4 | 314 | 281–407 | Hard water |
| Lake County | 16.8 | 288 | 133–332 | Hard water |
| Bartholomew County | 22.7 | 389 | 343–393 | Very hard water |
| Newton County | 4.3 | 74 | 31–143 | Soft water |
| Wayne County | 21.2 | 362 | 263–365 | Very hard water |
| Jasper County | 6.1 | 104 | 53–214 | Soft water |
La fourchette correspond aux 10e-90e centiles des mesures locales. Les comtés comptant moins de cinq mesures sont omis plutôt qu’estimés.
What 17.7 gpg means in Indiana
This is hard water: visible scale on fixtures within weeks, clogged shower heads, stiff laundry and a water heater working overtime. Anti-scale protection is strongly recommended.
What it does to your home
Water heater: even a thin layer of scale insulates the heating element and drives energy use up.
Appliances: dishwashers, washing machines and coffee makers scale up and fail years early.
Fixtures and skin: white spots on faucets and glass, dry skin and dull hair after every shower.
Comment cette valeur a été obtenue
Median of the site-level medians at 62 groundwater monitoring sites (wells and springs — the sources most US public systems draw from) in the USGS National Water Information System (106 individual measurements, 2018-04 → 2023-08). Each site is collapsed to one value first so that a heavily sampled location cannot skew the state figure; the range shown is the 10th-90th percentile across sites. This describes the raw water resource, not a specific municipal tap after treatment.
Water Quality Portal — USGS National Water Information System (NWIS), characteristic "Hardness, Ca, Mg"Statewide average — hardness varies by utility and season. Always verify with your local water quality report.
Frequently asked questions — Indiana
Is 17.7 gpg considered hard water?
On the US scale, 0–3.5 gpg is soft, 3.5–7 gpg moderately hard, 7–10.5 gpg hard and above 10.5 gpg very hard. At 17.7 gpg (302 ppm), water in Indiana is classified as Hard water.
Does Indiana have a limescale problem?
Water in Indiana averages 17.7 gpg — Hard water. The harder the water, the faster calcium carbonate deposits build up in water heaters, appliances and pipes. Below 3.5 gpg the risk is minimal; above 7 gpg scale becomes a running cost.
How do I find the exact water hardness at my address in Indiana?
Check your utility's annual water quality report (Consumer Confidence Report) or your water bill, or use our free interactive hardness map. Hardness can vary widely between neighboring utilities in Indiana.
Do I need a salt-based water softener at 17.7 gpg?
Not necessarily. Salt softeners add sodium to your water and need constant refills. LIMPEO treats limescale with an electromagnetic field — no salt, no chemicals, no maintenance — and keeps healthy minerals in your drinking water.