Water hardness by state
How hard is the water in North Dakota?
Tap water in North Dakota averages 17.4 grains per gallon (298 ppm calcium carbonate). That number determines how fast limescale coats your water heater, shower glass and appliances.
Auf Basis von 110 Messungen an 88 Messstellen, 2018-07 → 2023-08.
Wasserhärte nach Bezirk — North Dakota
Mediane der in jedem Bezirk erfassten Messungen. Die Härte schwankt innerhalb eines Bundesstaats deutlich stärker als zwischen Nachbarstaaten — daher stammt Ihr tatsächlicher Wert.
| Bezirk | gpg | mg/L | Bereich (mg/L) | Einstufung |
|---|---|---|---|---|
| Mountrail County | 16.2 | 277 | 14–887 | Hard water |
| Rolette County | 20.8 | 356 | 226–568 | Very hard water |
| Dunn County | 3.8 | 65 | 5–504 | Soft water |
| McKenzie County | 26.3 | 449 | 5–669 | Very hard water |
| McLean County | 17.6 | 301 | 7–321 | Hard water |
| Benson County | 14.2 | 243 | 61–298 | Moderately hard water |
| Morton County | 1.2 | 21 | 16–43 | Soft water |
Der Bereich entspricht dem 10.-90. Perzentil der lokalen Messungen. Bezirke mit weniger als fünf Messungen werden ausgelassen statt geschätzt.
What 17.4 gpg means in North Dakota
This is hard water: visible scale on fixtures within weeks, clogged shower heads, stiff laundry and a water heater working overtime. Anti-scale protection is strongly recommended.
What it does to your home
Water heater: even a thin layer of scale insulates the heating element and drives energy use up.
Appliances: dishwashers, washing machines and coffee makers scale up and fail years early.
Fixtures and skin: white spots on faucets and glass, dry skin and dull hair after every shower.
Wie dieser Wert ermittelt wurde
Median of the site-level medians at 88 groundwater monitoring sites (wells and springs — the sources most US public systems draw from) in the USGS National Water Information System (110 individual measurements, 2018-07 → 2023-08). Each site is collapsed to one value first so that a heavily sampled location cannot skew the state figure; the range shown is the 10th-90th percentile across sites. This describes the raw water resource, not a specific municipal tap after treatment.
Water Quality Portal — USGS National Water Information System (NWIS), characteristic "Hardness, Ca, Mg"Statewide average — hardness varies by utility and season. Always verify with your local water quality report.
Frequently asked questions — North Dakota
Is 17.4 gpg considered hard water?
On the US scale, 0–3.5 gpg is soft, 3.5–7 gpg moderately hard, 7–10.5 gpg hard and above 10.5 gpg very hard. At 17.4 gpg (298 ppm), water in North Dakota is classified as Hard water.
Does North Dakota have a limescale problem?
Water in North Dakota averages 17.4 gpg — Hard water. The harder the water, the faster calcium carbonate deposits build up in water heaters, appliances and pipes. Below 3.5 gpg the risk is minimal; above 7 gpg scale becomes a running cost.
How do I find the exact water hardness at my address in North Dakota?
Check your utility's annual water quality report (Consumer Confidence Report) or your water bill, or use our free interactive hardness map. Hardness can vary widely between neighboring utilities in North Dakota.
Do I need a salt-based water softener at 17.4 gpg?
Not necessarily. Salt softeners add sodium to your water and need constant refills. LIMPEO treats limescale with an electromagnetic field — no salt, no chemicals, no maintenance — and keeps healthy minerals in your drinking water.